2019年1月3日 · Need timing belt marks on 1.2Tsi - CJZ engine. Wednesday, November 28th, 2018 AT 1:50 AM. 11 Replies . KEN ...

I had some maintenance done on it (spark plugs, wires, transmission flush) and the mechanic recommended the timing belt and water pump be changed. The timing belt he said needed to …

What do the timing marks look like for my truck listed above it has the 2.3 liter engine. The timing belt has been removed and the crank has been turned slightly so I need to get it back in time. …

A. If reusing the timing belt, check that there are 3 installation marks on the timing belt as shown in the picture.(Fig13) 24. If the installation marks have disappeared put new installation marks …

In the middle of replacing timing belt on my truck. Haynes manual shows a timing belt guide ( looks like a big washer) that slides onto crankshaft. There was no guide on it when I tore it …

I assume this is correct timing. After puting everything back on the truck started right up. But, it had a very high idle, I drove it down the road and back and put a timing light on it, the timing …

Hi there, If you have never done a timing belt before, you may have some problems as getting the front pulley off is a problem if you don't have the required tools, doing the job is not the …

Went to replace timing belt on camry and noticed that there seem to be odd tiiming marks on both the crank and cam. On the Cam gear, there are three marks, two on the teeth which are six …

Remove the 4 bolts(B) and timing belt lower cover(A). Remove the timing belt tensioner(A) and timing belt. NOTE: If the timing belt reused, make an arrow indicating the turning direction to …

So, my timing belt snapped awhile ago and I've since disassembled much of the engine compartment in order to open up the engine. I've very recently removed the cylinder head in …